By 
The problem with most home improvement advice is that it’s geared toward a single goal: to make your home look nice. But the truth is most homeowners have more than one goal in mind when they’re trying to improve their homes.
They want their homes to look nice and also be functional. When it comes to Grout cleaning Canberra, these two goals often clash. If you’re looking for a way to make your bathroom looks like new again, then you probably don’t want to spend hours on end scrubbing away at the grout between your tiles. And if you’re trying to save money, then you need all the help you can get!
So, what are some super grout-cleaning tips? Here are 7 ideas that will save you time and money:
- Avoid Acidic Cleaners
The grout in your bathroom is porous, so it can absorb acidic cleaners. These cleaners will eat away at your grout and make it discoloured and dull. If you want to use an acidic cleaner on your grout, you’ll have to wait until the grout is completely dry before you apply it. Otherwise, the acid can continue to eat away at your grout as it dries.
- Spray Regularly With Water
Another thing that can damage your grout is letting it get too dry. Grout has tiny holes between each tile that allow water to pass through, but if they’re too large or there’s too much space between tiles, then dirt and mould can collect there instead of running down into the drain like it’s supposed to. To prevent this from happening, keep a spray bottle full of water next to the sink or tub and give all of your tiles a quick spritz every time you finish washing up or brushing your teeth — this way, when any moisture does accumulate inside those tiny spaces, it will evaporate quickly without causing any damage.
- Use Leftover Coffee Grounds
Coffee grounds are an excellent way to clean bathroom tiles and prevent mould growth in your shower. They are abrasive enough to scrub away grime but also have antimicrobial properties that kill bacteria and eliminate odours. Simply add about 1/4 cup of coffee grounds to your bucket of water and mix them together until they have formed a paste. The paste can then be applied directly onto the tile walls or shower floor using a sponge or cloth and scrubbed into the grout lines using gentle pressure (avoid using too much pressure as this may cause damage). Once the area has been scrubbed clean, rinse it off thoroughly with warm water and let it dry completely before applying any sealant or waxes.
- Try Lemon Juice And Baking Soda
This combination is effective in cleaning many types of stains, including those on your kitchen floor tiles. Mix equal parts baking soda and lemon juice in a bowl and apply it directly to your dirty tile floors. Let this mixture sit for about 15 minutes before scrubbing with a brush or sponge (or using an old toothbrush). You may have to reapply this mixture several times before it works its magic on your floor tile stains.
- Use White Vinegar And Dish Soap
Vinegar can be used as a natural alternative to bleach when treating stains on grout (and many other surfaces). Simply mix one part white vinegar with two parts water in a spray bottle, then apply the mixture generously to the stained area and allow it to sit for several minutes before scrubbing away with a toothbrush or other soft-bristled brush (or even an old toothbrush). You can also opt for commercial products made especially for grout cleaning Canberra; look for those containing hydrogen peroxide or baking soda instead of bleach (which can cause fading over time).
- Try Alka Seltzer
One option for cleaning your grout is using Alka Seltzer tablets in a bucket of water. The effervescent tablets will dissolve quickly and leave behind a nice scent. Simply drop two tablets into a bucket filled with warm water (enough to cover the entire tile surface), let sit for 30 minutes, and then scrub with an old toothbrush or sponge. The bubbles should help loosen any dirt stuck in your grout lines. Rinse well after scrubbing!
- Try Hydrogen Peroxide And Baking Soda
Hydrogen peroxide is another natural antimicrobial that can be used to clean your tile grout lines. You can use hydrogen peroxide as a cleaning agent straight from the bottle, but make sure you dilute it first with water or vinegar before spraying or pouring it onto your tiles! If you opt for this method, make sure to rinse off any remaining residue from your tiles with warm water after 30 minutes of waiting time.
Conclusion:
With a little bit of money, a bit of elbow grease and a few simple cleaning tricks, you can keep your tile looking as clean and beautiful as the day you installed it. But don’t take our word for it; be sure to try out these tips yourself and see how they help simplify your Grout cleaning Canberra process.
Comments